product-img

Artisté Vogue

JK Majesta Artisté Vogue offers eye-catching interior texture finishes for wall painting that
leave a lasting impression. It offers creative patterns and designs, enhancing the visual
appeal of the designer surface. JK Majesta Artisté Vogue delivers a wide range of
possibilities for captivating wall finishes.

Good flexibility and adhesion

Good flexibility and adhesion

Excellent weather and natural colour resistance

Excellent weather and natural colour resistance

Algae & Fungus Resistance

Algae & Fungus Resistance

Water Repellent

Water Repellent

Light-fast UV resistance

Light-fast UV resistance

Fire Retardant

Fire Retardant

Good flexibility and adhesion

Excellent weather and natural colour resistance

Algae & Fungus Resistance

Water Repellent

Light-fast UV resistance

Fire Retardant

Areas of Application

Bricks

Bricks

Cement Sand

Cement Sand

Plasters

Plasters

Stucoo

Stucoo

Concrete

Concrete

Gymsum Boards

Gymsum Boards

Woods

Woods

Downloadable
Resources

Get more information about this product
with these downloadable files.

Product Information Sheet

Surface Preparation

Clean the surface to remove any dirt, grease, or loose dust.

Clean the surface to remove any dirt, grease, or loose dust.

Address any dampness, seepage, or leakage before applying.

Address any dampness, seepage, or leakage before applying.

Remove any previous coating with a wire brush and ensure all surfaces are dry, clean, and structurally sound.

Remove any previous coating with a wire brush and ensure all surfaces are dry, clean, and structurally sound.

Newly plastered surfaces require at least 28 days to cure.

Newly plastered surfaces require at least 28 days to cure.

Apply one coat of interior primer or sealer as the base coat and follow the recommendations.

Apply one coat of interior primer or sealer as the base coat and follow the recommendations.

Level minor surface imperfections with acrylic surfacing plaster.

Level minor surface imperfections with acrylic surfacing plaster.

For trowel finish textures, ensure the surface is even.

For trowel finish textures, ensure the surface is even.

Precautions

Pre-treat surfaces with Algal growth or Efflorescence before applying the textured coating
Maintain a uniform application pattern with the spray gun to prevent texture variation.
Do not over or under-dilute the product, as it may cause shade variation.
Allow the coatings to dry for 48 hours.
Do not keep the material open for a long time.
Lead content does not exceed 90 ppm.
Keep it out of the reach of children.
The product may be harmful if swallowed or inhaled.
Avoid application in temperature over 40°C and below 5°C and in strong winds. Wash all equipments with water immediately after use

iamge

Explore Our Finishes

Decorika

Sorrento

Stucco Veneziano

Antica

Traventino

Pearl Skin

Mediterrano

Manhattan

Glitterati

Elastofine

Boticelli

Coralle

Colorato

Velvetino Pitted

Velvetino

Explore all Our Shades

Similar Products

JK Maximo Patternz – Exterior Scratch Finishes

JK Maximo Patternz – Exterior Scratch Finishes

Patternz RockTex

Patternz RockTex

Artisté Crete

Artisté Crete

Get in Touch

Contact