JKC LevelMaxX is a white cement-based wall leveller and a polymer modifying self-curing mortar. It’s a water-resistant product for all types of internal and external levelling and thin plaster applications over concrete and mortar wall surfaces. It can be used in dry, wet and humid conditions. It fills the fine pores of surfaces and covers up the undulations to give a white levelled surface. It can be used in dry, wet and humid conditions.
Get more information about this product
with these downloadable files.
Picking the right wall leveller is more than a box‑ticking exercise. If the base coat fails, then white cement paint can chip, chalk or bubble. LevelMaxX from JK White Cement is built to stop those problems before they start. It is a water‑resistant, polymer‑modified, self‑curing mortar that works on almost any masonry surface. In a single bag you get high bonding, high strength, and a white, even finish that makes later coats of white cement paint smoother and last longer.
Below is everything you need to know before opening the bag, from key features to application tips.
LevelMaxX performs on a wide range of substrates:
Whether you are topping up an old boundary wall or smoothing brand‑new RCC columns, you get the same feather‑edge finish that makes later coats of white cement paint pop.
Start by brushing off any dust, loose bits or flaky cement using a wire brush. If you spot cracks or deep holes, fill them up with a strong mortar mix before moving on.
Hold a straightedge or level against the wall. This will help you find any dips or hollows that need a little extra attention later.
Before applying anything, sprinkle some clean water on the surface. It should feel damp, not soaking wet, so the material grips well.
Pour LevelMaxX into a clean bucket and slowly add water (about 22-25% of the weight). Mix it well using a stirrer until it’s smooth and lump-free.
Apply a thin layer to those hollow spots you marked earlier. Smooth it out to match the rest of the surface.
Once patchwork is done, apply the mix across the whole surface. Work from the bottom up and try to keep a wet edge so you don’t get patchy lines.
Leave the wall to dry for about a day. No extra water or curing is needed, the product handles that on its own.
If there are any visible lines or ridges, give it a light sanding. You can also do a thin finishing coat of 1-2 mm if you want that super-smooth look before adding putty, primer or paint.
Do’s:
Dont’s:
For buyers comparing white cement price 20kg, LevelMaxX offers extra value because it cuts down on extra curing labour, delivers a whiter base, and reduces rebound losses during plastering.
With LevelMaxX from JK Maxx Paints, you get a cleaner white base, which means you’ll need fewer coats of white cement paint to get the finish you want. Plus, no water curing means your job moves faster without compromising strength. Each 40 kg bag covers up to 15 sq. ft. at 8 mm thickness, making it a smart choice for those keeping an eye on white cement price 20kg but wanting better coverage and durability. Whether it’s a bathroom, exterior wall or a humid basement, it holds up beautifully.
When comparing white cement price 20kg, it’s not just about the price tag, think about the time, effort, and repainting you might be saving too. LevelMaxX gives you a smooth surface, reliable strength, and a paint-ready wall in less time.
Cracks usually happen when the application isn’t done right, like applying too much material in one go, mixing with less water than needed, or skipping surface prep altogether. It also doesn’t help if the wall is hot or dusty.
The better way? Use a good quality, polymer-modified leveller that’s designed to move with the surface as the structure settles. Products like LevelMaxX have added flexibility and bonding strength, so they’re less likely to crack over time. Just make sure you’re applying it evenly, and never in direct sunlight or on a heated wall.
Nope, no curing required. That’s one of the best parts. LevelMaxX is self-curing, which means it holds on to enough moisture to set properly on its own. So you don’t need to hose the wall or monitor it, as it takes care of the drying process for you.
Yes, that’s exactly where LevelMaxX works well. It’s water-repellent, so it doesn’t soak in moisture like traditional levellers. Whether it’s your bathroom wall, a utility area, or an open balcony that sees humidity, this product helps the surface stay smooth, strong, and damp-resistant for longer.
It’s all about the stage of prep. A wall leveller is used first to correct any unevenness, fill hollows or undulations, and basically give you a levelled, flat base. It can be applied in thicker layers, up to 25 mm in some cases.
Putty comes after. It’s a much thinner application, usually 1-2 mm, and it smoothens out any tiny marks or textures left behind, readying your wall for paint.
Usually, a 24-hour gap after the final coat is enough for the surface to dry completely. If the weather is especially humid, give it a little more time. Once dry, you can go ahead with JK Wall Putty for extra smoothness, followed by your chosen white cement paint or any regular emulsion. Just run your hand over the surface, if it feels dry and even, you’re good to go.
